On the Assessment of Tribosystem Compatibility by Diverse Indicators and Methods (To the 100th anniversary of N. A. Bushe)
https://doi.org/10.21780/2223-9731-2016-75-5-263-270
Abstract
The article is devoted to the overview of the indicators (criteria) of tribosystem compatibility proposed by N..Bushe and their further development. Temperature criterion of compatibility and response of the tribosystem to tightening of the friction modes characteristic for running in regime are described. Materials compatibility indices and ways to manage surface fatigue mode of wear were considered. The article describes compatibility indices based on the entropy-energy approach, their application to kinematic pairs, the methods for determining such indices and the requirements for lubricating materials, providing compatibility conditions on the proposed indicators. The criteria of compatibility associated with squeeze of the soft structural component of the antifriction alloy materials were considered. The analytic modes that takes into account squeezing of the soft phase of the aluminum alloy not only due to the plastic, but also to the elastic deformation of the matrix are referred. On the basis of calculations based on these models conclusions on the structural composition of the studied alloys and the properties of its components, providing increase in the thickness of the lubricant film in different modes of friction. The results of these calculations based on the average thickness of the soft phase on the yield strength of the matrix and the concentration of the soft phase. are given. Considered comprehensive indices of compatibility with respect to complex tribosystems such as “crankshaft-its bearings” of diesel engines system.
About the Authors
S. M. Zakharov
Joint Stock Company “Railway Research Institute” (JSC “VNIIZhT”)
Russian Federation
Russian Federation
I. G. Goryacheva
Federal State Scientific Organization - Institute for Problems in Mechanics of the Russian Academy of Sciences n. a. Ishlinskiy (IPMech RAS)
Russian Federation
Russian Federation
References
1. Bushe N. A. Ob issledovaniyakh v oblasti otsenki sovmestimosti trushchikhsya par [On studies to assess compatibility of friction pairs]. Problemy treniya i iznashivaniya [Wear and friction problems]. Kyiv, Tekhnika Publ., no. 1, pp. 17 – 21.
2. Bushe N. A., Kopyt’ko V. V. Sovmestimost’ trushchikhsya poverkhnostey [Compatibility of friction surfaces]. Moscow, Nauka Publ., 1981, 126 p.
3. Chichinadze A. V., Bushe N. A. Sovmestimost’ tribosistem. Glava 8 v monografii “Trenie, iznos i smazka v mashinakh” [Compatibility of tribosystems. Chapter 8 in the monograph “Friction, wear and lubrication in machinery”]. Mashinostroenie Publ., 2003, pp. 307 – 338.
4. Matveevskiy R. M., Buyanovskiy I. A., Lazovskaya O. V. Protivozadirnaya stoykost’ smazochnykh sred pri trenii v rezhime granichnoy smazki [Score resistance of lubricating fluids under friction in the boundary lubrication regime]. Moscow, Nauka Publ., 1978, 191 p.
5. Karasik I. I. Prirabatyvaemost’, zakonomernosti i metody otsenki vliyaniya prirabotki i iznashivaniya na tribotekhnicheskie kharakteristiki opor skol’zheniya. Dokt. tech. nauk diss. Aftoref. [Running-in ability, regularities and methods of assessing the impact of the running-in and wear on the tribological characteristics of the sliding bearings. Dr.tech.sci.diss. Synopsis]. Moscow, 1983, 482 p.
6. Zelinskiy V. V. Novoe o mekhanizmakh prirabotki antifriktsionnykh podshipnikovykh materialov [New on the mechanisms of running-in of antifriction bearing materials], Sovremennye materialy i tekhnologii. Sbornik statey mezhdunarodnoy nauchnotekhnicheskoy konferentsii [Modern materials and technologies. Collection of articles of the international scientific conference]. Penza, 2002, pp. 141 – 144.
7. Garbar I. I. Fragmentatsiya poverkhnostnykh sloev nizkouglerodistoy stali i medi pri ustalostnom i adgezionnom iznashivanii [Fragmentation of the surface layers of low carbon steel and copper under fatigue and adhesive wear]. Trenie I iznos [Friction and wear], 1986, Vol. 7, no. 6, pp. 1043 – 1053.
8. Bershadskiy L. I. O samoorganizatsii tribosistem [On selforganization of tribosystems], Problemy treniya I iznashivaniya [Problems of friction and wearing]. Kyiv, Obschestvo “Znanie” UkrSSR Publ., 1981, no. 21, pp. 10 – 25.
9. Bushe N. A., Bershadskiy L. I., Boyko L. S., Zamanskiy L. S. Kriterii i metody issledovaniya sovmestimosti kinematicheskikh par treniya i ikh ispol’zovanie pri razrabotke novykh smazochnykh materialov dlya chervyachnykh peredach [Criteria and methods of compatibility studies of kinematic friction pairs and their use in the development of new lubricants for worm drives]. Kyiv, Tekhnika Publ., 1984, no. 5, pp. 67 – 76.
10. Bershadskiy L. I. Kriteriy tribologicheskioy sovmestimosti konstruktsionnykh i smazochnykh materialov [Criterion of tribological compatibility of structural and lubricating materials]. Kyiv, Obschestvo “Znaniye” UkrSSR Publ., 1988, 15 p.
11. Fedorov S. V. Razrabotka nauchnykh osnov energeticheskogo metoda sovmestimositi statsionarno- nagruzhennykh tribosistem. Dokt. tech. nauk diss. Aftoref. [Development of scientific foundations of the energy method of compatibility of fixed-loaded tribosystems. Dr.tech.sci.diss. Synopsis]. Moscow, 1996, 36 p.
12. Bushe N. A., Alekseev N. M., Trushin V. V., Markova T. F. Mekhanicheskie protsessy formirovaniya vtorichnykh struktur podshipnikovykh splavov [Mechanical processes of formation of secondary structures of bearing alloys]. Trenie i iznos [Friction and wear], 1981, Vol. 2, no. 3, pp. 212 – 220.
13. Bushe N. A., Goryacheva I. G., Korneev R. A. Kontaktnoe vzaimodeystvie antifriktsionnykh splavov, soderzhashchikh myagkuyu fazu [Contact interaction of anti-friction alloys containing a mild phase]. Izvestiya VUZov. Severo-Kavkazskiy region. Tekhnicheskie nauki. Spetsvypusk [Proc. of the universities. North-Caucasian region. Technical science. Special Issue]. 2001, pp. 35 – 39.
14. Bushe N. A., Goryacheva I. G., Makhovskaya Yu. Yu. Vliyanie fazovogo sostava antifriktsionnykh alyuminievykh splavov na ikh samosmazyvanie pri trenii [The effect of the phase composition of antifriction aluminium alloys on their self-lubrication in friction]ю Trenie i iznos [Friction and wear], 2002, Vol. 23, no. 3, pp. 286 – 295.
15. Kurbatkin I. I, Bushe N. A.,.Goryacheva I. G,.Zaychikov A. V. Vliyanie sostava alyuminievykh antifriktsionnykh splavov na protsessy obrazovaniya zashchitnykh plenok pri ikh kontaktnom vzaimodeystvii [Influence of the composition of aluminum antifriction alloys on the processes of formation of protective films at their contact interaction]. Trenie i iznos [Friction and wear], 2006, Vol. 27, no. 4, pp. 355 – 360.
16. Makhovskaya Yu. Yu., Goryacheva I. G. Modelirovanie vydeleniya myagkoy fazy na poverkhnost’ mnogokomponentnogo alyuminievogo splava pri trenii [Modeling of allocation of the mild phase on the surface of multi-component aluminum alloy under friction]. Fizicheskaya mezomekhanika [Physical mesomechanics], 2016, Vol. 19, no. 1, pp. 15 – 23.
17. Zakharov S. M., Erdman V. F. Gidrodinamicheskiy i teplovoy raschet podshipnikov kolenchatogo vala porshnevogo dvigatelya [Hydrodynamic and thermal calculation of the crankshaft of the piston engine bearings]. Vestnik mashinostroeniya [Bulletin of machinery engineering], 1978, no. 3, pp. 22 – 24.
18. Buyanovskiy I. A., Zakharov S. M., Chichinadze A. V. Smazka [Lubrication], Trenie, iznos i smazka. (tribologiya i tribotekhnika) [Friction, wear and lubrication. (Tribology and Tribotechnics)]. Moscow, Mashinostroenie Publ., 2003, pp. 184 – 248.
Review
For citations:
Zakharov S.M., Goryacheva I.G. On the Assessment of Tribosystem Compatibility by Diverse Indicators and Methods (To the 100th anniversary of N. A. Bushe). RUSSIAN RAILWAY SCIENCE JOURNAL. 2016;75(5):263-270. (In Russ.) https://doi.org/10.21780/2223-9731-2016-75-5-263-270
Views:
579
.jpg)
Email this article 