Preview

RUSSIAN RAILWAY SCIENCE JOURNAL

Advanced search

Laboratory and Rig Tests of High-Strength and High Crack Resistance Wheel Tyres

Abstract

The paper presents development/comprehension tests outcomes of locomotive wheel tyre prototypes of grade ‘H’ medium alloy steel. These high-strength and high crack resistance tyres are intended for use with series 2EC10, 2EC7 and 2EC6 new generation freight electric locomotives with asynchronous traction drive. The work under discussion was carried out by the JSC VNIIZhT experts in cooperation with JSC “EVRAZ NTMK”. It covered the development of wheel tyre production specifications including those related to chemical content and mechanical properties of steel, appraisal of the tyre heat treatment conditions, manufacturing of tyre prototypes as well as laboratory and rig testing aimed to assess the tyre property package. Wheel tyre prototypes of grade “H” steel were subject to laboratory and rig tests at the JSC VNIIZhT experimental facilities inclusive of analysis of working layer mechanical properties and of hardness/microstructure distribution over the cross-section, assessment of cold resistance, determination of the tyre static fracture toughness (crack resistance) K1С and damping capacity (tenacity) Kfc, as well as analysis of the tyre stress state. Based on the positive results of the initial and acceptance tests of the grade ‘H’ steel tyres pilot run there was adopted the decision on the under-control operation of the tyres with the series 2EC10 electric locomotives on the Sverdlovskaya Railway network.

About the Authors

G. I. Bryunchukov
JSC Railway Research Institute (JSC VNIIZhT)
Russian Federation


A. S. Razumov
JSC Railway Research Institute (JSC VNIIZhT)
Russian Federation


A. V. Sukhov
JSC Railway Research Institute (JSC VNIIZhT)
Russian Federation


A. V. Zorin
JSC “EVRAZ NTMK”
Russian Federation


R. A. Il’Inykh
JSC “EVRAZ NTMK”
Russian Federation


V. V. Brekson
Ural Locomotives Ltd
Russian Federation


References

1. Bryunchukov G. I., Razumov A. S., Sukhov A. V., Filippov G. A., Izotov V. I., Brekson V. V. Razrabotka stali dlya lokomotivnykh bandazhey povyshennoy prochnosti i treshchinostoykosti [Development of locomotive tire steel with increased strength and crack growth resistance]. Vestnik VNIIZhT [Vestnik of the Railway Research Institute], 2015, no. 4, pp. 12 – 18.

2. Bashnin Yu. A., Ushakov B. K., Sekey A. G. Tekhnologiya termicheskoy obrabotki stali [Technology of heat treatment of steel]. Moscow, Metallurgiya Publ., 1986. 424 p.

3. Lakhtin Yu. M. Metallovedenie i termicheskaya obrabotka metallov [Metallurgy and heat treatment of metals]. Moscow, Metallurgiya Publ., 1993. 448 p.

4. Guseev S. A., Bukhinik E. N., Cherevik Yu. I. Sovremennoe sostoyanie i perspektivy obespecheniya dolgovechnosti termicheski uprochnennykh bandazhey [Current state and prospects for durability of thermally hardened bandages]. Chernaya metallurgiya. Nauka. Tekhnologiya. Proizvodstvo: sb. nauch. tr. [Ferrous metallurgy. Science. Technology. Production: Coll. sci. works]. Moscow, Metallurgiya Publ., 1989, pp. 352 – 355.

5. Fedin V. M. Ob’emno-poverkhnostnaya zakalka detaley podvizhnogo sostava i verkhnego stroeniya puti [Space-surface hardening of parts of the rolling stock and track superstructure]. Moscow, Intext Publ., 2002. 208 p.

6. Shkol’nik L. M., Markov D. P. Prokalivaemost’ stali kak rezerv povysheniya iznosostoykosti bandazhey i koles [Hardenability of steel as a provision to increase the wear resistance of tires and wheels]. Vestnik VNIIZhT [Vestnik of the Railway Research Institute], 1990, no. 8, pp. 32 – 36.

7. Birger I. A. Ostatochnye napryazheniya [Residual stresses]. Moscow, Mashgiz Publ., 1963. 232 p.

8. Fink K., Rorbakh R. Izmerenie napryazheniy i deformatsiy (transl. from German) [Measurement of stress and strain]. Moscow, Mashinostroenie Publ., 1961. 536 p.

9. Kiselev S. N. et al. Strukturnoe i napryazhenno-deformirovannoe sostoyanie bandazhey koles lokomotivov pri zakalke [Structural and stress-strain state of wheel tires of locomotives during quenching]. Vestnik VNIIZhT [Vestnik of the Railway Research Institute], 1991, no. 1, pp. 42 – 46.

10. Bryunchukov G. I., Markov D. P. Eksperimental’naya otsenka raspredeleniya ostatochnykh napryazheniy v lokomotivnykh bandazhakh [Experimental evaluation of the residual stress distribution in locomotive bandages]. Voprosy razvitiya zheleznodorozhnogo transporta v usloviyakh rynochnoy ekonomiki. Sb. nauch. tr. OAO “VNIIZhT” [Issues of railway transport development in a market economy. Coll. of sci. works of JSC “VNIIZhT” (Railway Research Institute)]. Moscow, Intext Publ., 2007, pp. 180 – 188.


Review

For citations:


Bryunchukov G.I., Razumov A.S., Sukhov A.V., Zorin A.V., Il’Inykh R.A., Brekson V.V. Laboratory and Rig Tests of High-Strength and High Crack Resistance Wheel Tyres. RUSSIAN RAILWAY SCIENCE JOURNAL. 2015;(5):44-50. (In Russ.)

Views: 537


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2223-9731 (Print)
ISSN 2713-2560 (Online)