On the issue of improving the reliability of the cylinder head of the diesel engine
https://doi.org/10.21780/2223-9731-2020-79-1-39-47
Abstract
Cylinder head in a modern diesel engine is one of the most complex structurally loaded parts of its cylinder-piston group. The cylinder head is one of the most damaged units that determine the terms of scheduled repairs of the entire engine and, ultimately, the level of costs to maintain its performance. Article gives a review of studies on the cylinder head refinement of a diesel engine 5D49 (ChN26/26), and especially its main part which is the fire deck of the combustion chamber. Design disadvantage of the fire deck is the close location of the holes of the exhaust and intake valves, the inclined location of the nozzle. Depending on the heating and on the degree of constraint of the deformation of the head element, i. e. the absence of its free expansion, during heat exchange the process of destruction of the fire deck elements proceeds, which is characterized by the accumulation of fatigue damage in the material and plastic deformations. Studies have shown that under stationary loading conditions with the same scale of alternation of heating and cooling, the head should provide failure-free and durable operation. The occurrence of cracks due to the accumulation of residual stress should be attributed to the share of random "bursts" of temperature and temperature stresses arising during transient processes. These processes occupy approximately 20 % of the total engine operating time. One of the main reserves for improving the reliability of heads is to prevent exceeding thermal loads in operation by optimizing transient processes and increasing the uniformity of cylinder loading. The cylinder head of the 5D49 (ChN26/26) diesel engine type, apparently, has outlive the possibilities for a significant increase in reliability and service life and bringing it into line with operational requirements. For use on new engines, a new head must be developed — symmetrical with a central vertical arrangement of the nozzle, and with a well-thought-out cooling circuit.
About the Authors
I. V. Sirotenko
Joint Stock Company "Railway Research Institute" (JSC "VNIIZhT")
Russian Federation
Russian Federation
Igor' V. Sirotenko - Cand. Sci. (Eng.), JSC "VNIIZhT".
Moscow, 129626
E. E. Kossov
Joint Stock Company "Railway Research Institute" (JSC "VNIIZhT")
Russian Federation
Russian Federation
Evgeniy E. Kossov - Dr. Sci. (Eng.), Professor, Chief Researcher, Department "Traction rolling stock", JSC "VNIIZhT".
Moscow, 129626
References
1. Osyaev A. T., Nikiforov V. A., Kholomin Yu. I. Voprosy ekspluatatsionnoy nadezhnosti forsirovannogo teplovoza 2TE25K [Issues of operational reliability of the forced locomotive 2TE25K]. Vest-nik VNIIZhT [Vestnik of the Railway Research Institute], 2013, no. 6, pp. 66-73.
2. Nasyrov R. A., Chichin A. V Dizeli tipa D49: puti snizheniya povrezhdaemosti detaley [Diesels of type D49: ways to reduce damage to parts]. Lokomotiv, 2000, no. 10, pp. 26-31.
3. Dvigateli novogo pokoleniya [Engines of the new generation]. Zhurnal dlya partnerov ZAO "Transmashkholding" [Journal for partners of the CJSC "Transmashholding"], 2017, no. 3, pp. 20-23.
4. Dvigatel' D500: luchshiy v svoem segmente [D500 engine: the best in its segment]. Zhurnal dlya partnerov ZAO "Transmashkholding" [Journal for partners of the CJSC "Transmashholding"], 2016, no. 3, pp. 18-21.
5. Zinner K. EinfluB der ZylindergroBe auf die Wahl des Verbrennungsverfarens // M.A.N. (Dieselmotoren Nachrichten), 1973, no. 50, pp. 26-42.
6. Wartsila 32 Product Guide-a22-13 March 2018. URL: https://www.wartsila.com/docs/default-source/product-files/engines/ms-engine/product-guide-o-e-w32.pdf (retrieved on 08.11.2019).
7. Saltykov M. A., Sal'nikov M. A. Otsenka soprotivleniya razrusheniyu chuguna s sharovidnoy formoygrafita pri temperaturnykh tsiklicheskikh nagruzkakh dlya prognoza resursa detaley tsilindro-porshnevoy gruppy dvigateley transportnogo naznacheniya [Estimation of resistance to fracture of cast iron with spherical shape of graphite at temperature cyclic loads to predict the resource of parts of the cylinder-piston group of transport engines]. Dvigatelestroe-nie [Engine construction], 1983, no. 6, pp. 35-38.
8. Raenko M. I., Ryzhov V. A. Otsenka prochnostnoy nadezhnosti kryshek tsilindrov transportnykh dizeley po kriteriyu dolgo-vechnosti [Assessment of the strength reliability of cylinder heads of transport diesel engines by the criterion of durability]. Dvi-gatelestroenie [Engine construction], 2012, no. 1 (247), pp. 7-17.
9. SEMT Pielstick diesel engines. Chantiers de l'Atlantique. St. Denis, 1977, 32 p.
10. Raenko M. I., Ryzhov V. A., Myagkov S. P. Opredele-nie spektra ekspluatatsionnykh nagruzok dlya kryshek tsilindrov sredneoborotnykh transportnykh dizeley [Definition range of operating loads for the cylinder heads of medium transport diesel engines]. Dvigatelestroenie [Engine construction], 2010, no. 1 (239), pp. 9-12.
11. Sazonov Yu. I. Issledovanie teplovogo sostoyaniya kryshki tsilindra dizeley i teploobmena mezhdu ee dnishchem i gazom. Kand. tekhn. nauk diss. [Investigation of the thermal state of the cylinder head of diesel engines and heat transfer between its bottom and gas. Cand. tech. sci. diss.]. Moscow, Mosk. vyssh. tekhn. uchilishche im. N. E. Baumana [Moscow Higher Technical School n. a. N. E. Bauman] Publ., 1977, 189 p.
12. Chaynov N. D., Ivashchenko N. A., Krasnokutskiy A. N., Myagkov L. L. Konstruirovanie dvigateley vnutrennego sgoraniya [Design of internal combustion engines]. Moscow, Mashinostroe-nie Publ., 2008, 496 p.
13. Sal'nikov M. A. Otsenka dolgovechnosti kryshek tsilindrov teplovoznykh dizeley v zavisimosti ot urovnya teplonapryazhen-nosti. Kand. tekhn. nauk diss. [Estimation of the durability of cylinder heads of diesel engines depending on the level of heat stress. Cand. tech. sci. diss.]. Kolomna, 1984, 214 p.
14. Kossov E. E., Sukhoparov S. I. Optimizatsiya rezhimov rabo-ty teplovoznykh dizel'-generatorov [Optimization of operating modes of diesel generators]. Moscow, Intext Publ., 1999, 184 p.
15. Babel M. Teoreticheskie osnovy i metodologiya vybora ob“emov i tekhnologiy modernizatsii teplovozov po kriteriyu stoi-mostizhiznennogo tsikla. D-ra tekhn. nauk avtoref. diss. [Theoretical foundations and methodology for the selection of volumes and technologies for the modernization of diesel locomotives by the criterion of the cost of a life cycle. Dr. tech. sci. diss. synopsis]. Moscow, JSC "VNIIZhT" Publ., 2014, 48 p.
16. Nikitin E. A., Matusevich S. A., Bogdanov B. I. Issledovanie teplovogo i napryazhennogo sostoyaniya kryshki tsilindrov dizelya ChN26/26 [Investigation of the thermal and stress state of the cylinder head of the diesel engine ChN26/26]. Voprosy povysheniya nadezhnosti detaley. Sb. tr. TsNIDI [Issues of improving reliability of parts. Proc. of TsNIDI works]. St. Petersburg, Tsentr. nauch.-issled. dizel'nyy in-t [Central Scientific and Research Institute] Publ., 1979, no. 76, pp. 42-47.
17. Sorger H., Zieher F., Sauerwein U., Schoffman W. Highly loaded cylinder heads. Trends and Potentials. MTZ (Motortechnische Zeitschrift), 2008, Vol. 69, no. 2, pp. 4-10.
18. Zieher F., Langmayr F., Ennemoser A., Jelatancev A., Hager G., Wieser K. Advanced thermal mechanical fatigue life simulation of cylinder heads. ABAQUS. Proc. of Conf., May 25-27, 2004. Boston, 2004, pp. 789-805.
19. Myagkov S. P. Povyshenie prochnostnoy nadezhnosti kryshek tsilindrov transportnykh dizeley. Kand. tekhn. nauk diss. [Improving the strength reliability of cylinder heads of transport diesel engines. Cand. tech. sci. diss.]. Moscow, Mosk. vyssh. tekhn. uchilishche im. N. E. Baumana [Moscow Higher Technical School n. a. N. E. Bauman] Publ., 2009, 177 p.
20. Ryabko K. A., Ryabko E. V. Povyshenie dolgovechnosti kry-shek tsilindrov teplovoznykh dizeley [Increasing the durability of I E-mail: sirotenko.igor@vniizht.ru (I. V. Sirotenko) cylinder heads of diesel engines]. Izvestiya Transsiba [Bulletin of the Trans-Siberian Railway], 2016, no. 4 (28), pp. 30-37.
21. Trinev A. V., Avramenko A. N. Vliyanie vozdushnogo okhlazh-deniya ognevogo dnishcha na teplonapryazhennoe sostoyanie kryshki tsilindra teplovoznogo dizelya [Effect of cooling air to the bottom of the combustion state of the cylinder head of the calorific locomotive diesel]. Avtomobil'nyy transport [Road transport], 2007, no. 20, pp. 88-91.
22. Myagkov L. L., Malastovskiy N. S., D'yakova L. N., Blinov A. S. Issledovanie napryazhenno-deformirovannogo sostoyaniya kryshki tsilindra vysokoforsirovannogo dizelya [Study of the stress-strain state of the cylinder head of a highly accelerated diesel engine]. Izvestiya vysshikh uchebnykh zavedeniy. Mashinostroenie [Proc. of higher educational institutions. Engineering], 2015, no. 2 (659), pp. 42-51.
23. Chaynov N. D., Myagkov L. L., Malastovskiy N. S. Chislennoe modelirovanie dvizheniya zhidkosti v polosti okhlazhdeniya kryshki tsilindra sredneoborotnogo dizelya [Numerical simulation of fluid motion in the cooling cavity of the cylinder head of a medium-speed diesel]. Gruzovik, 2015, no. 5, pp. 4-8.
24. Xincai Li, Chen Z. A single-phase flow model based on void fraction for boiling heat transfer calculation in cylinder head. Ship & Offshore Special. The Intern. publication of Shiff & Hafen. 2010, no. 3, p. 87.
Review
For citations:
Sirotenko I.V., Kossov E.E. On the issue of improving the reliability of the cylinder head of the diesel engine. RUSSIAN RAILWAY SCIENCE JOURNAL. 2020;79(1):39-47. (In Russ.) https://doi.org/10.21780/2223-9731-2020-79-1-39-47
Views:
690
.jpg)
Email this article 