Evaluation of prevailing draft loads in the couplings of the electric trains

Introduction. Until now, the requirements for manual and automatic couplers for locomotive-hauled passenger carriages and electric trains have been completely identical, despite the significantly lower level of longitudinal forces during the movement of multi-unit rolling stock with distributed traction. The introduction of specialised designs of coupling devices for electric trains led to the development of strength requirements that enable the creation of new models with smaller dimensions and weight. Operating experience has shown that parts of couplings may be destroyed, leading to the uncoupling of trains. Fatigue damage may cause accidents. However, there were studies of the draft loads of electric trains couplers in operation, on the basis of which it was possible to develop regulatory requirements for specialised coupling devices.
Materials and methods. The authors measured the forces acting in the couplings of electric trains of various categories and types during normal operation, as well as the frequencies of the occurrence of forces of various levels. The article includes histograms based on the results of processing the received data showing the distribution of longitudinal forces acting on the inter-car couplers and the parameter characterising the accumulation of fatigue damage per 100,000 km. 
Results. According to the results of processing of the experimental data, the calculation of the accumulation of fatigue damage to the couplers was carried out and the requirements for their expected service life were established. Test procedures have also been developed to evaluate strength and fatigue resistance under high-cycle and low-cycle loading conditions. The article provides ground for introducing a correction factor into the procedure for processing test results, which makes it possible to perform life tests on equipment with different values of the load cycle asymmetry factor.
Discussion and conclusion. The authors have evaluated the draft loads in coupling devices during the operation of electric trains, on the basis of which technical requirements and test methods were developed and approved by JSC Russian Railways. Development and acceptance of all new models of coupling devices for electric trains will be carried out in accordance with these regulatory documents.

1. O bezopasnosti zheleznodorozhnogo podvizhnogo sostava [On the safety of railway rolling stock]. Technical regulations of the Customs Union (TR TS 001/2011): adopted by the decision of the Commission of the Customs Union dated July 15, 2011 No. 710 (as amended by the decision of the Council of the Eurasian Economic Commission dated September 14, 2021 No. 90). URL: https://docs.cntd.ru/document/902293438 (access date: 15.08.2022). (In Russ.).

2. Jackiewicz J. Coupler force reduction method for multiple-unit trains using a new hierarchical control system. Railway Engineering Science. 2021;(29):163-182.

3. GOST 3475–81. Ustroystvo avtostsepnoe podvizhnogo sostava zheleznykh dorog kolei 1520 (1524) mm. Ustanovochnye razmery [Automatic coupling device for rolling stock of 1520 (1524) mm gauge railways. Installation dimensions]. Introduction date 1982-01-01. Reissue. Moscow: Publ. house of standards; 1998. 6 p. (In Russ.).

4. Belyaev V. I., Stupin D. A. Stsepnye i avtostsepnye ustroystva zheleznodorozhnogo podvizhnogo sostava [Manual and automatic coupling devices of railway rolling stock]. Moscow: Transinfo Publ.; 2012. 414 p. (In Russ.).

5. GOST 25.101–83. Raschety i ispytaniya na prochnost'. Metody skhematizatsii sluchaynykh protsessov nagruzheniya elementov mashin i konstruktsiy i statisticheskogo predstavleniya rezul'tatov [Calculations and strength tests. Methods for schematization of random processes of loading of machine elements and structures and statistical presentation of results]. Introduction date 1984-07-01. Moscow; 1983. 25 p. (In Russ.).

6. Normy rascheta i proektirovaniya vagonov zheleznykh dorog MPS kolei 1520 mm (nesamokhodnykh) [Calculation and Design Norms for 1520 mm Gauge Railway Cars of the Ministry of Railways (non-self-propelled)]. Moscow: GosNIIV-VNIIZhT Publ.; 1996. 316 p. (In Russ.).

7. Zhukov V. A., Mikhaylov Yu. K. Mekhanika. Osnovy rascheta i proektirovaniya detaley mashin [Mechanics. Fundamentals of calculation and design of machine parts]. Textbook. Moscow: INFRA-M Publ.; 2014. 348 p. (In Russ.).

8. GOST 25.504–82. Raschety i ispytaniya na prochnost'. Metody rascheta kharakteristik soprotivleniya ustalosti [Calculations and strength tests. Methods for calculating fatigue resistance characteristics]. Introduction date 1983-07-01. Moscow: Publ. house of standards; 1982. 55 p. (In Russ.).

9. Pravila tekhnicheskoy ekspluatatsii zheleznykh dorog Rossiyskoy Federatsii [Rules for the technical operation of the railways of the Russian Federation]. Approved by order of the Ministry of Transport of Russia dated June 23, 2022 No. 250. URL: https://docs.cntd.ru/document/351240235?marker=6560IO (access date: 15.08.2022). (In Russ.).

10. Tekhnicheskie trebovaniya k prochnosti i soprotivleniyu ustalosti pri malotsiklovykh i mnogotsiklovykh rezhimakh nagruzheniya stsepnykh ustroystv elektropoezdov i metodiki ispytaniy [Technical requirements for endurance and fatigue resistance under low-cycle and high-cycle loading modes of electric train coupling devices and testing methods]. Order of Russian Railways Company dated April 7, 2022 No. 934/r. ASPIZhT database (access date: 15.08.2022). (In Russ.).