Analysis of the state of production and manufacturing quality of bronze-babbit bearings of the crankshaft of diesel locomotives
https://doi.org/10.21780/2223-9731-2017-76-3-131-137
Abstract
The article gives the study on the areas of application of bronze-babbit bearings for diesel locomotives are considered. Information is provided on the types of diesel engines and locomotives for which they are installed, where such bearings are used. The main types of damage are described: fatigue and corrosion-cavitation wear and the factors affecting them. Authors presented results of research on technological factors that affect fatigue damage, such as the technology of tinning the bronze body with solders, the quality of pig babbit. The chemistry of calcium babbit and BK2 babbit in an antifriction layer is reviewed. The violations that occur during the manufacture of bearings by various manufacturers are described. The results of analysis of the influence of the chemical composition of babbit on its structure are presented. The influence of calcium and magnesium is described, in particular, on the formation of swelling on the babbit surface. The paper provides results of studies on the adaptability of the babbit layer to changes in friction conditions with the formation of various types of secondary structures. Micro-X-ray spectral studies of babbit layers of various liners and secondary structures on friction surfaces have been carried out. As the conclusion of the article the studies carried out and suggestions were made aimed at checking the quality of bronze-babbit bearings manufactured by various manufacturers.
About the Authors
A. E. Mironov
Joint Stock Company “Railway Research Institute” (JSC “VNIIZhT”)
Russian Federation
Russian Federation
S. M. Zakharov
Joint Stock Company “Railway Research Institute” (JSC “VNIIZhT”)
Russian Federation
Russian Federation
G. S. Foks-Rabinovich
McMaster University
Russian Federation
Russian Federation
M. M. Zheleznov
Joint Stock Company “Railway Research Institute” (JSC “VNIIZhT”)
Russian Federation
Russian Federation
References
1. Bushe N. A. Podshipnikovye splavy dlya podvizhnogo sostava [Bearing alloys for rolling stock]. Moscow, Transport Publ.,1967, 222 p.
2. Zakharov S. M., Nikitin A.P., Zagoryanskiy Yu. A. Podshipniki kolenchatogo vala teplovoznykh dizeley [Crankshaft bearings of diesel engines]. Moscow, Transport Publ., 1981, 181 p.
3. Zakharov S. M., Bushe N. A., Zagoryanskiy Yu. A., Nikitin A. P. Izuchenie protsessa kavitatsii i kavitatsionnogo iznashivaniya podshipnikov skol'zheniya transportnykh dvigateley. Problemy treniya i iznashivaniya [Study of the process of cavitation and cavitation wear of sliding bearings of transport engines. Problems of friction and wear]. Kiev, Tekhnika Publ., 1973, Vol. 3, pp. 61 – 68.
4. Murmanskiy B. E., Yazykov A. E., Brodov Yu. N. Remont podshipnikov parovykh turbin: ucheb. posobie dlya vyssh. tekhn. ucheb. zavedeniy [Repair of bearings of steam turbines: a manual for higher technical educational institutions]. Ekaterinburg, Ural University Publ., 2014, 150 p.
5. Mironov A. E. O kachestve bronzo-babbitovykh podshipnikov kolenchatykh valov dizeley teplovozov [On the quality of bronze-babbit bearings of crankshafts of diesel engines of railway locomotives]. Vestnik VNIIZhT [Vestnik of the Railway Research Institute], 2002, no. 6, pp. 25 – 27.
6. Arzamasov B. N., Makarova V. I., Mukhin G. G. Materialovedenie i tekhnologiya metallov [Material Science and Technology of Metals]. Moscow, MGTU n.a. N. E. Bauman Publ., 2002, 646 p.
7. Gershman I. S., Gershman E. I., Mironov A. E. Ispol'zovanie neravnovesnoy termodinamiki i teorii samoorganizatsii dlya opisaniya tribosistem i razrabotki iznosostoykikh materialov [The use of nonequilibrium thermodynamics and the theory of selforganization for the description of tribosystems and the development of wear-resistant materials]. Vestnik BGTU, 2016, no. 4 (52), pp. 32 – 38.
8. Banjac M., Vencl A., Otović S. Frictionand Wear Processes – Thermodynamic Approach. Tribology in Industry, 2014, Vol. 36, no. 4, рр. 341 – 347.
9. Nosonovsky M. Entropy in Tribology: in the Search for Applications. Entropy, 2010, Vol. 12, no. 6, pp. 1345 – 1390.
10. Zakharov S. M., Ermolaev A. A., Mironov A. E., Skvortsov A. E. Analiz putey sovershenstvovaniya primenyaemykh materialov i tekhnologiy izgotovleniya podshipnikov kolenchatogo vala teplovoznykh dizeley [Analysis of ways to improve the materials used and technologies for manufacturing bearings of the crankshaft of diesel locomotives]. Tyazheloe mashinostroenie, 2015, no. 6, pp. 11 – 18.
Review
For citations:
Mironov A.E., Zakharov S.M., Foks-Rabinovich G.S., Zheleznov M.M. Analysis of the state of production and manufacturing quality of bronze-babbit bearings of the crankshaft of diesel locomotives. RUSSIAN RAILWAY SCIENCE JOURNAL. 2017;76(3):131-137. (In Russ.) https://doi.org/10.21780/2223-9731-2017-76-3-131-137
Views:
667
.jpg)
Email this article 