Analysis of the canting stability as a factor determining the lateral wear of rails

Reducing the intensity of rail lateral wear remains an important task for industry science. As part of solving this problem, studies are being carried out on the influence of the geometry of the rail track on the wear of rails, the intensity of the force interaction of wheels and rails, the tribological characteristics of the contacting surfaces. The article focuses on the influence on the wear of the geometry of the rail track, namely the rail canting. The definition of the stability of the rail canting has been formulated, which makes it possible to proceed to the assessment of this indicator both in time and in the length of the track section. The assessment of the canting stability over time was carried out on the basis of experimental data obtained in the course of field studies carried out in 2019–2020 on the Moscow Railway. As a result of evaluating these data, the dependence of the change in the average values and the standard deviation of the rail canting in the section on time was built. The average values and standard deviation of the canting in the investigated area are considered in this article as a set of parameters that make it possible to assess the canting stability. In addition to these parameters, it is proposed to evaluate the canting stability along the length of the section based on the canting offset and the standard deviation. The assessment of the stability of the rail canting along the length of the section was carried out using calculations performed in the “Universal Mechanism” software package. As a result of calculations, the values of frame and lateral forces were obtained and an assessment of their maximum and average values at the site was made. This made it possible to answer the question: how does the retraction of the rail canting affect the level of force interaction at the point of contact between the wheels and rails, and, hence, the wear rate?

1. Pevzner V. O., Belotsvetova O. Yu., Potapov A. V. Rezul'taty nablyudeniy po otsenke vliyaniya ekspluatatsionnykh faktorov na bokovoy iznos rel'sov [Results of observations to evaluate the impact of operational factors on the side rail wear]. Vestnik VNIIZhT [Vestnik of the Railway Research Institute], 2016, Vol. 75, no. 4, pp. 242 – 247. DOI: http://dx.doi.org/10.21780/2223-9731-2016-75-4-242-247.

2. Pevzner V. O., Belotsvetova O. Yu., Tret'yakov V. V., Potapov A. V., Petropavlovskaya I. B., Tret'yakov I. V., Goryunov A. V. Vliyanie ekspluatatsionnykh faktorov na ushirenie kolei i bokovoy iznos rel'sov [Influence of operational factors on track widening and lateral wear of rails]. Railway Track and Facilities, 2013, no. 1, pp. 8 – 11.

3. Zharov I. A., Zakharov S. M. Zavisimost' tipa iznashivaniya koles i rel'sov ot parametrov ikh kontakta i shiriny kolei [Dependency between type of wear and rail wear and parameters of contact and track gauge]. Vestnik VNIIZhT [Vestnik of the Railway Research Institute], 2010, no. 2, pp. 46 – 49.

4. Karpushchenko N. I., Kozlov A. P., Kotova I. A., Antereykin E. S. Parametry kolei i iznos rel'sov v krivykh [Track parameters and rail wear in curves]. Railway Track and Facilities, 2007, no. 11 (2), pp. 7 – 9.

5. Verigo M. F. Vzaimodeystvie puti i podvizhnogo sostava v krivykh malogo radiusa i bor'ba s bokovym iznosom rel'sov i grebney koles [Interaction of track and rolling stock in small radius curves and fight against lateral wear of rails and wheel flanges]. Moscow, PKTB TsP MPS Publ., 1997, 207 p.

6. Zakeri J.-A., Fathali M., Roundsari N. B. Effects of rail cant on wheel-rail contact forces in slab tracks. International Journal of Mechanics and Applications, 2011, no. 1 (1), pp. 12 – 21.

7. Pevzner V. O., Potapov A. V., Belotsvetova O. Yu. Poduklonka rel'sov i ee svyaz' s bezopasnost'yu dvizheniya i bokovym iznosom [Rail canting and its connection with traffic safety and lateral wear]. Railway Track and Facilities, 2018, no. 2, pp. 30 – 33.

8. Ob utverzhdenii i vvedenii v deystvie Instruktsii po tekushchemu soderzhaniyu zheleznodorozhnogo puti [On the approval and implementation of the Instruction on the current maintenance of the railway track]. Order of the JSC “Russian Railways” dated November 14, 2016 No. 2288r. URL: http://www.consultant.ru/cons/cgi/online.cgi?req=doc&base=EXP&n=692153#049192640458186054 (retrieved on 13.04.2021) (in Russ.).

9. Potapov A. V. Sistema otsenki, kontrolya i regulirovaniya poduklonki lezhashchikh v puti rel'sov [System of evaluation, control and regulation of the rails lying in the track]. Science and Technology in transport, 2019, no. 1, pp. 58 – 62.

10. Kurtikov R. M. Rezul'taty nablyudeniy po otsenke vliyaniya poduklonki rel'sov na bokovoy iznos rel'sov [Results of observations on the assessment of the influence of rail canting on lateral wear of rails]. Sovremennye problemy proektirovaniya, stroitel'stva i ekspluatatsii zheleznodorozhnogo puti. Materialy XVI Mezhdunar. nauch.-tekhn. konf., posvyashchennoy pamyati prof. G. M. Shakhunyantsa (Moskva, 3 – 4 aprelya 2019 g.) [Modern problems of design, construction and operation of a railway track. Materials of the XVI Int. scientific and technical conf. dedicated to the memory of prof. G. M. Shakhunyants (Moscow, April 3 – 4, 2019)]. Moscow, RUT (MIIT) Publ., 2019, pp. 266 – 269.

11. Kurtikov R. M. Neravnomernost' bokovogo iznosa i poduklonki rel'sov v krivykh uchastkakh puti [Unevenness of lateral wear and rail canting in curved sections of the track]. Aspirantskie chteniya. Sb. nauch. st. aspirantov IPSS RUT (MIIT) [Postgraduate reading. Coll. of scientific articles of IPSS RUTH (MIIT) graduates]. Moscow, Pero Publ., 2020, issue 3, pp. 31 – 33.

12. Potapov A. V., Pevzner V. O., Mikhaylov V. V. Poduklonka lezhashchikh v puti rel'sov (teoriya i praktika) [Canting of rails lying in the track (theory and practice)]. Saratov, Nauka Publ., 2009, 101 p.